Diagnostic code
P0117 Code: Engine coolant temperature low signal
When P0117 appears, focus on engine coolant temperature low signal and the conditions recorded when the monitor failed. The practical path is check coolant level only when the engine is cool; then check whether low coolant or trapped air, w
Educational reference only, not professional repair advice. A fault code is a starting point, not a diagnosis. Vehicle symptoms, live data, service history, and manufacturer-specific procedures change the repair path. If the check engine light is flashing, the vehicle is overheating, brakes or steering feel unsafe, fuel odor or smoke appears, or the engine is running poorly, stop driving when safe and get professional help.
Sources
Can I drive?
A short local trip may be possible if the vehicle runs normally and the check engine light is solid. Avoid highway driving, towing, hard acceleration, or ignore-the-light driving until P0117 is diagnosed, especially if rough running, overheating, fuel smell, or power loss appears.
Repair range
$90-$900
Scanner note
OBD-II scanner with live coolant temperature data
Plain-English Meaning
When P0117 appears, focus on engine coolant temperature low signal and the conditions recorded when the monitor failed. The practical path is check coolant level only when the engine is cool; then check whether low coolant or trapped air, wiring, sensor feedback, or a mechanical condition explains the data.
Common Causes
Common possibilities (most common first):
- Low coolant or trapped air
- Thermostat stuck open or closed
- Faulty coolant temperature sensor
- Cooling fan or relay problem
- Water pump, radiator, or circulation restriction
Order varies by make, model, mileage, and operating conditions. Do not replace parts based only on this list — verify with a scan tool and qualified mechanic.
Symptoms
- Check engine light
- Temperature gauge abnormal
- Poor heater output or overheating
- Reduced performance when hot
Diagnostic Steps
- 1Check coolant level only when the engine is cool
- 2Compare live coolant temperature with actual engine temperature
- 3Inspect thermostat operation and hose temperature changes
- 4Verify fan operation and relay control
- 5Pressure-test the system if leaks or overheating are suspected
Confusable And Related Codes
P0300
Compare →P0300 means the engine is misfiring randomly or across multiple cylinders instead of one clearly identified cylinder. Ignition, fuel, air leaks, compression problems, or timing issues can all interrupt combustion and trigger this code.
P0128
Compare →P0128 means the engine is taking too long to reach the expected operating temperature. A thermostat stuck open is common, but low coolant, sensor readings, wiring, and fan behavior should be checked before parts are replaced.
P0118
Compare →P0118 is best read as a cooling system evidence trail. In this case the important clues are low coolant or trapped air; thermostat stuck open or closed; faulty coolant temperature sensor. The code narrows the system to test, but the repair
P0115
Compare →A vehicle stores P0115 when the cooling system monitor sees engine coolant temperature circuit problem. For this code, the most useful early clues are check engine light and temperature gauge abnormal; diagnosis should then move through che
FAQ
What does P0117 mean in plain English?
P0117 means the computer saw a engine coolant temperature low signal. It identifies the system to test first, not a guaranteed failed part.
Can I drive with P0117?
Possibly for a short local trip if the vehicle runs normally and the light is solid. Stop driving if the light flashes, the engine overheats, power drops, or strong fuel smell appears.
Is P0117 always caused by one part?
No. Several electrical, sensor, airflow, fuel, mechanical, or wiring issues can set the same code, so testing should confirm the cause before parts are replaced.
This page is educational and is not a substitute for hands-on vehicle diagnosis.